ENGLISH 4006-WOSIGN
首页>技术支持>SSL证书安装指南-iPlanet 4.x

SSL证书安装指南-iPlanet 4.x

a. Fetch your certificate and the Intermediate CA certificate

1. You will receive an email when your certificate is issued.
2. Copy and Paste your Certificate (First certificate) to Notepad and save as a cert.txt
5. Copy and Paste the Intermediate CA Certificate (second certificate) to Notepad and save as a intermediate.txt

b. Install the Intermediate CA certificate

1. In the Web Server Admin Server, choose the Servers Tab, and choose Manager Server link.
2. Select the appropriate server and click on Manage. Choose Security Tab and from the side panel menu on the left frame, select the "Install Certificate" option.
3. On the "Install a Server Certificate" frame, do the following:
Select the " Server Certificate Chain " radio button
Under certificate name type in "WoTrust CA"
Select the "Message text (with headers)" radio button.
Select (highlight) the certificate you saved as intermediate.txt and copy them onto the clipboard. Cut and paste the Intermediate CA by clicking on the button marked, Intermediate CA, above.
In the Admin server's "Message text (with headers)" frame, paste the copied information from the clipboard into the space provided. Click OK
Click add certificate on the page where the cert profile is shown
There should be some processing and a statement saying that the server which utilizes this information must be shutdown and restarted. Again, don't shutdown and restart the server until the steps below are completed.
Continue below

c. Install your certificate

4. Click install certificate
5. In the "Install a Server Certificate" frame, do the following:
Select the " This Server " radio button
Select the "Message text (with headers)" radio button.
Go to your saved cert (cert.txt). Highlight and copy it onto the clipboard.
In the Admin server's "Message text (with headers)" frame, paste the copied information from the clipboard into the space provided. Click OK
6. Click add certificate on the page where the cert profile is shown
7. There should be some processing, and a statement saying that the server which utilizes this information must be shutdown and restarted. However, it is not necessary to restart the server until all the steps below have been completed.

d. Turning on Encryption

1. Click on the Preferences Tab in the server manager
2. Click on Encryption On/Off
3. In Encryption On/Off window, click the ON radio button.
4. Choose your port number (default is port 443)
5. Click OK.
6. Click Save and Apply changes
7. Finally, the server should then be shutdown and restarted.